Task
The configured alarms for temperature monitoring are to be output in an alarm control in runtime.
To filter by plant object alarms in the alarm control, configure a filter with the criterion "Area" with one of the following two conditions:
-
"Equal" - only shows the alarms of the selected plant object in runtime.
-
"Begins with" - shows the alarms of the underlying objects of the selected plant object in runtime.
Requirement
-
The "Overview" screen is created and open for editing.
-
Configure a "Plant overview" control in the "Overview" screen.
-
The "Alarm control" control is created as companion control of the plant overview.
Configuring a filter for the "Filling Tank" plant object
To filter by alarms of the "Filling Tank" plant object in the alarm control, configure a filter as follows:
-
In the Inspector window under "Properties > Filter", click in the "Static value" column.
The "Alarm filter configuration" dialog box opens.
-
Select the "Area" criterion.
-
Select the condition "Equal".
-
Click on the selection list in the "Operand" column.
-
Select the "Filling Tank" plant object whose alarms are to be displayed in runtime.
Result
You have configured an alarm control for alarms of the "Filling Tank" plant object. The alarms of the plant object can be displayed in runtime.